Electronic three-way electric control valve-Shanghai ShangFa valve manufacturing (group) Co., LTD

First, an electronic three-way control valve overview

Electronic three-way electric control valve with high precision, stable and reliable operation and so on. The confluence type is mainly used to mix two fluids into a third fluid; the split type is mainly used to divide one fluid into two fluids. This product can replace the two single-and double-seat switch valves, which are used for the regulation and control of liquids, gases, steam and other media.

Second, the electronic three-way valve main technical parameters and performance indicators

By the PS series and 3610 series of straight-stroke electric actuator and low flow resistance through the single seat valve. (Also can be equipped with other brands of straight-line Cheng executive body). Electric actuator for the electronic integration structure, with a servo amplifier, the input control signal (4-20mADC or 1-5VDC) and the power to control the valve opening, to pressure, flow, level, temperature and other parameters adjust. With sensitive action, simple connection, large flow, small size, high regulation accuracy. Control accuracy and performance than the DKZ type has significantly improved.

Third, the three-way electronic control valve regulating agencies the main technical parameters

Nominal diameter mm	confluence	25	32	40	50	65	80	100	125	150	200	250	300
	Shunt	25	32	40	50	65	80	100	125	150	200	250	300
Seat diameter mm		26	32	40	50	65	80	100	125	150	200	250	300
Rated flow coefficient kv	confluence	8.5	13	21	34	53	85	135	210	340	535	800	1260
	Shunt	8.5	13	21	34	53	85	135	210	340	535	800	1260
Nominal pressure (MPa)		0.6, 1.6, 2.5, 4.0, 6.4
Travel (mm)		16		25		40			60			100
Flow characteristics		straight line
Operating temperature ℃		-40 ~ 230 ℃ (room temperature type), heat sink 230 ~ 450 ℃ (medium temperature), special order -100 ~ 600 ℃
Flange size		In line with JB78-59, JB79-59 standards, according to JB / 79.1-94, JB, ANSI, JIS, DIN and other standard production orders
Body material		WCB (ZG230-450), ZG1Cr18Ni9Ti, ZG0Cr18Ni12Mo2Ti CF8 CF8M
Spool material		1Cr18Ni9, SS304, Cr18Ni12Mo2Ti, SS316, ZG1Cr18Ni9Ti
Body type		Three-way two-seat cast ball valve
On the bonnet type		Ordinary (room temperature), heat sink (medium temperature), long neck (low temperature)
Equipped with electric actuator model	PSL	PSL-202		PSL-204		PSL-208			PSL-312			PSL325
	361L	361LSA-20		361LSB-30		361LSB-50			361LSC-65			361LSC-99
	Explosion-proof	361LXA-20		361LXB-30		361LXB-50

Note:
1, Users can provide ANSI, JPI, JPI and other countries Flange standard products, the flange according to the user needs to determine.
2, the working temperature, nominal pressure, nominal diameter beyond the scope of the list of products can contact with the company.

Fourth, the electronic three-way valve actuator main technical parameters

model		Rated output force N		Speed mm / s		Technical Parameters
PSL	361L	PSL	361L	PSL	361L	PSL	361L
201	361LSA-08 361LXA-08	1000	800 800	0.25	4.2 4.2	Power: AC220V 50Hz Input signal: DC4-20mA DC1-5V (signal line shielded cable) Output signal: DC4 ~ 20mA Protection class: IP67 With hand wheel	Power: AC220V 50Hz Input signal: DC4-20mA DC1-5V (signal line shielded cable) Output signal: DC4 ~ 20mA Protection class: quite IP55 Flameproof mark: ExdⅡBT4 with handle
202	361LSA-20 361LXA-20	2000	2000 2000	0.50	2.1 2.1
204	361LSB-30 361LXB-30	4500	3000 3000	0.50	3.5 3.5
208	361LSB-50 361LXB-50	8000	5000 5000	1.00	1.7 1.7
312	361LSC-65	12000	6500	0.60	2.8
325	361LSC-99	25000	10000	1.0	2.0

Fifth, electronic three-way valve performance indicators

project			Index value
Basic error%			± 2.5
Backlash%			2.5
dead zone%			1.0
Always point deviation%	Electricity	Start point	± 2.5
		end	± 2.5
	Power off	Start point	± 2.5
		end	± 2.5
Adjustable range			30: 1
Rated travel deviation%			2.5
Allowable discharge L / H			Meet the JB / T7387-94 Class IV less than the rated capacity of 10-4

Six, electronic electric three-way valve to allow pressure

Nominal diameter mm	25	32	40	50	65	80	100	125	150	200	250	300
Allowable pressure difference MPa	3.32	2.20	2.20	1.41	1.38	0.94	0.61	0.51	0.36	0.20	0.19	0.13

Note: The actual configuration needs to be based on specific process parameters. If the allowable differential pressure is clear or the maximum allowable working pressure is outside the range of the list, please contact us and take the appropriate method to solve it.

Seven, electronic electric three-way control valve dimensions

Public Path (mm)			25	32	40	50	65	80	100	125	150	200	250	300
L (mm)	PN1.6MPa		185	200	220	250	275	300	350	410	450	550	640	740
	PN4.0MPa		190	210	230	255	285	310	355	425	460	560	660	760
	PN6.4MPa		200	210	235	265	295	320	370	440	475	570	670	770
H1 (mm)	PN1.6MPa		140	150	160	180	200	220	220	256	278	322	465	580
	PN4.0MPa		150	160	170	190	220	232	256	295	313	372	474	585
	PN6.4MPa		160	170	180	200	220	242	266	300	318	382	474	585
With PSL	H (mm)	normal type	775	781	775	790	819	820	810	917	927	947	1252	1545
	H (mm)	Heat sink type	905	911	905	920	766	983	973	1116	1126	1144	1805	1825
	D (mm)		176
	Weight (KG)		61.5	64.5	69.5	76.5	109	132	164	207	267	395	430	480
With 361L	H (mm)	normal type	538	544	660	675	744	745	735	972	982	1027	1204	1265
	H (mm)	Heat sink type	668	674	790	805	691	908	898	1171	1181	1224	1440	1502
	D (mm)		225							310
	Weight (KG)		69	72	85	92	124	147	179	260	320	448	627	780

Note: The nominal diameter of less than 80 shunt valve using the same diameter instead of the confluence valve.

The next：Electronic single-seat electric control valve (explosion-proof type)

The previous：Electronic electric sleeve regulating valve